3 Installation and Commissioning
Frei verwendbar House Control with Master-Slave - LOGO! Set 9
Entry ID: 64143308, V2.2, 09/2018
21
©
S
ie
m
e
n
s
A
G
2018
A
ll
r
ig
h
ts
r
e
s
e
rv
e
d
3.3.5
IP addresses and subnet masks
Table 3-2
No.
Device
IP address
Subnet mask
1.
Master LOGO!
192.168.1.10
255.255.255.0
2.
Slave LOGO!
192.168.1.11
255.255.255.0
3.
LOGO! TDE
192.168.1.14
255.255.255.0
4.
Network card or USB Ethernet Adapter for
network connection to PC
192.168.1.12
255.255.255.0
Note
The respective setup guidelines for LOGO! must generally be followed.
CAUTION
In this application example, all LOGO! signals are designed for 24V technology.
If a combination of 230V and 24V is required, a 230V basic device must be used.
Between a 230V basic device and a 24V expansion module, an analog module
for potential separation must be used.
3.4
Downloading a program into LOGO! 8
Together with this application example a completed LOGO! program for LOGO! 8
is offered for download. The table below contains a description on how to load the
completed LOGO! program into LOGO! 8. Start LOGO! Soft Comfort V8 and make
the following settings:
Table 3-3
No.
Action/response
LOGO! Soft Comfort V8
1.
Navigate to "File > Open” and select the
downloaded LOGO! program
"64143308_LOGO_Set9_
Master_Slave_CODE_v21.lnp”.
2.
The "Network view” with the master and
slave LOGO! opens.
3.
Double-click on the program title to open the
diagram.
