Siemens LI60LBC24, Руководство пользователя и инструкции по установке

Страница: 13 / 20

Installation instructions
en
13
4.
Screw the appliance onto the mounting brackets.
5.
Align the appliance and the mounting brackets in
the cabinet and tighten all of the screws.
6. Secure the exhaust pipe to the air pipe connector.
7.
Connect the exhaust pipe to the exhaust air opening
on the external air extraction system.
8.
Seal the joints.
9. Insert the mains plug into the protective contact
socket.
10. Fit the grease filters.
To avoid causing damage, do not bend the grease
filters.
Changing the filter pull-out's limit stop
1.
Pull out the filter pull-out fully.
2.
Undo the screw for the front end stop and pull it for-
wards as far as possible.
3.
Close the filter pull-out and align it to the furniture.
4. Pull out the filter pull-out again.
5.
Retighten the screw for the front end stop.
Setting the air flow
Requirement:
The grease filters have been removed.
→ "Removing the grease filter", Page 7
1.
To set the air flow, change the position of the ab-
sorber.
2.
In order to increase the air flow, open the one-way
flap and remove the reducing disc.
3.
Adjust the reducing disc.
4.
Insert the reducing disc and close the one-way flap.
Measuring the airflow
▶
In order to measure the pressure drop, attach the
hose to the measurement opening on the front
edge of the air pipe connector.