Siemens LC91KWW20B Скачать руководство пользователя страница 11

Страница: 11 / 24

Home Connect

Home Connect

Home Conne

This appliance is Wi-Fi-capable and can be controlled

using a mobile device.
If the appliance is not connected to your home network,

it will function as an extractor hood with no network

connection and can still be operated via the display.
The availability of the Home Connect function depends

on the availability of Home Connect services in your

country. Home Connect services are not available in

every country. You can find more information on this at

www.home-connect.com.

Notes

■

Ensure that you follow the safety instructions in this

instruction manual and that you comply with these

even when you are away from home and are

operating the appliance via the Home Connect app.

You must also follow the instructions in the

Home Connect app.

■

Using the controls on the appliance itself always

takes priority over remote control. During this time, it

is not possible to operate the appliance using the

Home Connect app.

Setting up

To implement settings via Home Connect, you must

have installed and set up the Home Connect app on

your mobile device.
Refer to the Home Connect documents supplied for

more information.
Follow the steps specified by the app to implement the

settings.
The app must be open in order to perform the set-up

process.

Automatic registration in the home network

Notes

■

You require a router that has WPS functionality.

■

You require access to your router. If you do not have

this, follow the steps for "Manually logging into your

home network".

■

The extractor hood cannot be switched on during the

connection process. You can cancel the process at

any time by pressing the

symbol.

■

To connect the extractor hood to your home

network, the hood and the light must be switched off.

Press and hold the

symbol until the

and

indicators start flashing.

To start automatic login to your home network, swipe

right over settings area ||| until

and

‚

flash.

Press the WPS button on the router within the next

2 minutes.

If the extractor hood has successfully connected, it

will automatically connect to the Home Connect app.

and

„

will flash.

Note:

If the extractor hood has been unable to

connect, it will automatically allow you to manually

connect to your home network.

and

will flash.

Log the appliance into your home network manually

or swipe left over the settings area to try logging in

automatically again.

On your mobile device, follow the instructions for

automatic network login.

The login process is complete when the

indicator

stops flashing on the control panel and remains

continuously lit.

Manual registration in the home network

Notes

■

The extractor hood cannot be switched on during the

connection process. You can cancel the process at

any time by pressing the

symbol.

■

To connect the extractor hood to your home

network, the hood and the light must be switched off.

Press and hold the

symbol until the

and

indicators start flashing.

To manually log into your home network, swipe right

over settings area ||| until

and

flash.

Use the "Home Connect" SSID and the "Home

Connect" key to log the mobile device into the

extractor hood network.

If the extractor hood has successfully connected, it

will automatically connect to the Home Connect app.

and

„

will flash.

On your mobile device, follow the instructions for

manually logging into your network.

The login process is complete when the

indicator

stops flashing on the control panel and remains

continuously lit.

Содержание LC91KWW20B

























Результаты поиска

Содержание LC91KWW20B

Отзывы:

Бренды по названию

Популярные бренды

Siemens LC91KWW20B, Инструкция по установке и эксплуатации

Результаты поиска

Содержание LC91KWW20B

Отзывы:

Бренды по названию

Популярные бренды