11
Determine the installation positions of the fasteners
(fixing brackets and mounting rails) on the wall and
follow steps indicated in photo below. If the adjustable
cover is not needed, skip step 5.
Draw a line on the wall from the ceiling to the lower
edge of the hood at the centre of the location where
the hood is going to be mounted.
After determining installation positions of the
fasteners on the wall, use a driller with a diameter of
10 mm to drill holes in the wall.
Insert the accessory wall plug into the drilling holes
and fix the fasteners (fixing brackets and mounting
rails) onto the wall with the accessory fixing screws.
Installation Instruction
Installation of Fasteners
Product Model
Dimension B (mm)
Mounting
Rails
Minimum 750 mm
from gas hob
Minimum 650 mm
from electric hob
Note:
The lower edge of dimension B is the bottom point of
cooker hood (Oil collector is not included).
LC38S953..
485
Fixing
Brackets
347mm
45mm
120mm
220mm
B
