Troubleshooting
en
21
2.
Remove the grid and the grease filter.
Fitting odour filters
1.
Place the odour filter on the grease filter.
2.
Use the grid to secure the odour filter.
8.8 Fitting grease filters
ATTENTION!
Falling grease filters may damage the hob below.
▶
Grip below the grease filter with one hand.
1.
Fit the grease filters.
2.
Fold the grease filters upwards and engage the
locks.
3.
Make sure that the locks engage.
9 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
9.1 Malfunctions
Fault
Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
9.2 Replacing the LED lights
WARNING ‒ Risk of electric shock!
When changing the bulb, the bulb socket contacts are
live.
▶
Before replacing the bulb, unplug the appliance
from the mains or switch off the circuit breaker in
the fuse box.
WARNING ‒ Risk of injury!
The light emitted by LED lights is very dazzling, and
can damage the eyes (risk group 1).
▶
Do not look directly into the switched-on LED lights
for longer than 100 seconds.
Note:
Only use bulbs of the same type and wattage.
1.
Disconnect the appliance from the power supply.
2.
Loosen and remove the bulb cover .
