Siemens KBPC M, Руководство по эксплуатации

Страница: 2 / 12

Keyboard KBPC M
2 - English
A26381-K276-Z100-3-5E19
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
!
Pay particular attention to texts marked with this symbol. Failure to observe this warning
endangers your life, destroys the system, or may lead to loss of data.
i
This symbol is followed by supplementary information, remarks and tips.
Texts which follow this symbol describe activities that must be performed in the order shown.
"Quotation marks" indicate names of chapters, disks and terms that are being emphasized.
Important notes
!
In this chapter you will find information regarding safety which is essential to take note of
with your keyboard.
Safety
This device complies with the relevant safety regulations for data processing equipment, including
electronic office machines for use in an office environment. If you have any questions, contact your
sales office or our customer service.
•
Transport the device only in its original packaging or another corresponding packaging to
protect it from knocks and jolts.
•
If the device is brought into the installation site from a cold environment, condensation can
form. Before operating the device, wait until it is absolutely dry and has reached approximately
the same temperature as the installation site.
•
During installation and before operating the device, observe the instructions on environmental
conditions in the chapter "
Technical data ".
•
Lay all cables so that nobody can stand on them or trip over them.
•
Please ensure that no objects (e. g. necklaces, paperclips etc.) or liquids can get into the
interior of the device (short circuit).
•
The device may only be operated on a low safety voltage (in accordance with IEC 950/
EN 60950).
•
The keyboard interface of the system unit (5 V supply voltage) must have a safety fuse with a
maximum of 5 A.
•
Data cables for peripherals must be adequately insulated to avoid interference.
•
Use cleansing tissues to clean the outside of the keyboard.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
•
Keep this Operating Manual together with your device. If you pass on the device to third
parties, you should also pass on this manual.