Quick Start Guide
Chester Creek
BigBlu VisionBoard
™
&
BigBlu KinderBoard
™
02/25/2020 Rev. C
Step 1: Install Batteries
The battery compartment is located on
the bottom of the keyboard.
1. Remove the two Phillips-head screws
and set aside
2. Remove the battery compartment
cover by sliding it in the direction
indicated by the arrow
3. Insert two alkaline AAA batteries
4. After batteries are installed, carefully
replace the battery cover and secure
in place with the two screws
LED Indicator Light
Power Switch
Bluetooth Pairing Button
Battery Compartment
Adjustable
Feet
About Your Keyboard
(BigBlu VisionBoard Shown)
Step 2: Pair Bluetooth Keyboard to
Device
The power switch and Bluetooth pairing
button are located on the bottom of the
keyboard.
1. Turn the power switch on. The LED
indicator light next to the space
bar will blink blue once when the
keyboard is turned on.
2. Press the pairing button to enable
the keyboard pairing mode. The LED
indicator light will blink blue until the
keyboard is paired or until 2-minutes
has passed.
3. Within the Bluetooth settings on
your device, select the keyboard and
enter the pairing code. Pairing code
is generated by the devices you are
pairing the keyboard to.
4. The LED indicator light will stop
blinking after completing the pairing
process.
5. Your keyboard is now ready to use.
