Siemens IQ700 HS658GE 7B Series, Инструкция по эксплуатации

Страница: 23 / 64

en Sabbath mode
22
List of settings
This list tells you all the basic settings and how to
change them. Depending on the model of the appliance
you own, the display will show only those settings that
apply to your appliance.
You can change the following settings:
Caution!
For shelves and single rails: "Not retrofitted" setting.
For sets of two or three rails: "Retrofitted" setting.
Note:
Changes to the language, button tone and
display brightness settings take effect immediately. All
other changes take effect after the settings have been
saved.
--------
Changing the time
You can change the time in the basic settings.
For example: Changing from summer to winter time.
1.
Press the menu button.
The operating modes menu opens.
2.
Touch "Settings".
3.
Touch the arrow
Æ
to move to "Clock".
4.
Use the rotary selector to change the time.
5.
Press the menu button.
"Save" or "Discard" appears on the display.
Power cut
Following a long power cut, the settings for initial use
are shown in the display.
Reset the language, time and date.
F
Sabbath mode
Sabbath mode
With the Sabbath mode, a cooking time of up to 74
hours can be set. You can keep the food in the cooking
compartment warm without having to switch the oven
on or off.
Starting Sabbath mode
Prerequisite: "Sabbath mode activated" is activated in
the basic settings.
~
"Basic settings" on page 21
The cooking compartment heats up with top/bottom
heating and a temperature between 85 °C and 140 °C.
1.
Press the On/Off button.
A type of heating and a temperature are suggested
in the display.
2.
Turn the rotary selector anti-clockwise and select the
"Sabbath mode" type of heating.
3.
Touch the suggested temperature and set the
temperature using the rotary selector.
4.
Press the 0 button to open the time-setting options
menu and touch the "Cooking time" field.
25:00 hours are suggested.
5.
Use the rotary selector to set the required cooking
time.
6.
Press the Start/Stop button to start.
You can see the cooking time counting down in the
status bar.
Setting Options
Select language Additional languages possible
Time of day Sets the current time
Date Sets the current date
Water hardness 0 (softened)
1 (soft)
2 (medium)
3 (hard)
4 (very hard)
Audible signal duration Short (30 s)
Medium (1 m)
Long (5 m)
Button tone Switched off (button tone still sounds
when switching on/off using the "On/off"
button)
Switched on
Display brightness Can be adjusted to one of five different
levels
Clock display Digital with date
Analogue
Off
Lighting On during operation
Off during operation
Childproof lock* Door lock + button lock
Button lock only
Operation after switching
on
Main menu
Heating modes
Steaming
Dishes*
Night-time dimming Switched off
Switched on (display dimmed between 10
p.m. and 5.59 a.m.)
Brand name logo Display
Do not display
Fan run-on time Recommended
Minimum
Pull-out system Not retrofitted
Retrofitted
Sabbath mode Switched on
Switched off
Home Connect Switches Wi-Fi on or off
~
"Home
Connect" on page 23
Factory settings Restore
Do not restore
*) Included, depending on appliance model
Home Connect en
23
The cooking time has elapsed
A signal sounds. The oven stops heating. “Finished”
appears in the status bar.
Setting a later end time
It is not possible to set a later end time.
Cancelling Sabbath mode
Press the On/Off button. All settings are deleted. You
can apply new settings.
o
Home Connect
Home Connect
This appliance is Wi-Fi-capable and can be remotely
controlled using a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as an oven
with no network connection and can still be operated
via the display.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
■
Ensure that you follow the safety instructions in this
instruction manual and that you comply with these
even when you are away from home and are
operating the appliance via the Home Connect app.
You must also follow the instructions in the
Home Connect app.
~
"Important safety
information" on page 5
■
Operating the appliance directly from the appliance
always has priority. During this time, it is not possible
to operate the appliance using the Home Connect
app.
Setting up
To set up Home Connect for your appliance, you
require the following:
■
Your appliance, which must be connected to the
mains and switched on,
■
A smartphone or tablet with the latest version of the
iOS or Android operating system,
■
The Home Connect app,
■
The supplied Home Connect installation instructions,
■
And your appliance within range of the Wi-Fi signal
for your home network
The app guides you through the entire process. Follow
the instructions in the app.
Remote Start
In order to start and operate your appliance via the
Home Connect app, you must activate remote start. If
remote start has been deactivated, you can only display
the operating statuses in the Home Connect app and
implement appliance settings.
Note: Some of the operating modes can only be started
on the oven.
Remote start is automatically deactivated:
■
if you open the oven door 15 minutes after remote
start has been activated.
■
if you open the oven door 15 minutes after the end
of operation.
When you start the oven using the controls on the
appliance itself, remote start is automatically activated.
You can now make changes or start a new programme
from your mobile device.
Activating remote start
1.
Press the menu button.
2.
Touch "Remote start".
C appears in the display.
Home Connect settings
You can adjust Home Connect to suit your
requirements at any time.
Note:
You will find the Home Connect settings in your
appliance's basic settings. Which settings the display
shows will depend on whether Home Connect has been
set up and whether the appliance is connected to your
home network.
Basic setting Possible settings Explanation
WiFi Switching on/off You can switch the wireless module on and off. If WiFi is activated, you can use the Home
Connect function. The appliance requires max. 2 W in networked standby.
Network Connecting to the network/
disconnecting from the net-
work
Switch the network connection on or off as required (e.g. for holiday).
The network information will be retained after the appliance is switched off. After switch-
ing on the appliance, wait for a few seconds while it reconnects to the network.
Connect to app Start the connection process between the app and the appliance.
Remote control on/off Use the Home Connect app to access the appliance's functions. When it is deactivated,
only the operating statuses are displayed in the app.
Appliance information l
The display shows the network and appliance information.