Troubleshooting
en
17
Fault
Cause and troubleshooting
A warning signal
sounds and
flashes in the temper-
ature display.
The exterior ventilation grilles are blocked.
▶
Remove any obstructions from in front of the exter-
ior ventilation grilles.
A warning signal
sounds and
flashes
in the temperature dis-
play.
It was too cold in the wine storage compartment for
an extended period.
▶
Press any touch field.
Note:
flashes until the set temperature is reached
again.
The temperature dif-
fers greatly from the
setting.
Different causes are possible.
1.
2.
Switch the appliance back on after five minutes.
→
‒
If the temperature is too warm, check the temper-
ature again after a couple of hours.
‒
If the temperature is too cold, check the temper-
ature again on the following day.
The base of the wine
storage compartment
is wet.
The condensation channel or drainage hole are
blocked.
▶
Clean the condensation channel and the drainage
hole. →
The appliance hums,
bubbles, buzzes,
gargles or clicks.
Not a fault. A motor is running, e.g. refrigerating unit,
fan. Refrigerant flows through the pipes. The motor,
switches or solenoid valves are switching on or off.
No action required.
The appliance makes
noises.
Fittings wobble or stick.
▶
Check the removable fittings and, if required, re-
place these.
