en
Troubleshooting
16
Troubleshooting
13 Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist
staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
Cause and troubleshooting
The appliance is not
cooling, the displays
and lighting light up.
Showroom mode is switched on.
1.
Press and hold + at the same time until
flashes in the temperature display.
2.
After a short time, check whether your appliance is
cooling.
The LED lighting does
not work.
Different causes are possible.
▶
Call customer service.
The customer service number can be found in the
enclosed customer service directory.
or appears in the
temperature display.
The electronics have detected a fault.
1.
2.
Disconnect the appliance from the mains.
Unplug the appliance from the mains or switch off
the circuit breaker in the fuse box.
3.
Reconnect the appliance after five minutes.
4.
If the message still appears on the display, call cus-
tomer service.
The customer service number can be found in the
enclosed customer service directory.
appears in the tem-
perature display.
The button lock is switched on.
▶
Switch off the button lock.
A warning signal
sounds and
flashes in the temper-
ature display.
It was too warm in the wine storage compartment for
an extended period.
▶
Press any touch field.
Note:
flashes until the set temperature is reached
again.
