GAMMA instabus
Technical Product Information
February 2013
IP Controller N350E
5WG1 350-1EB01
Technical manual
N350E, 4 Seiten
Siemens AG
Infrastructure & Cities Sector, Building Technologies
Update: http://www.siemens.com/gamma
© Siemens AG 2013
Control Products and Systems
Subject to change without further notice
P.O. Box 10 09 53, D-93009 Regensburg
2.12.1.12/2
Installation Instructions
·
The device may be used for permanent interior instal-
lations in dry locations within distribution boards or
small casings with DIN rail EN 60715-TH35-7,5.
V
WARNING
·
The device must be mounted and commissioned by an
authorised electrician.
·
The device may be mounted to switch and socket
combination box mounts if VDE-certified devices are
used exclusively.
·
The prevailing safety rules must be heeded.
·
For planning and construction of electric installations,
the relevant guidelines, regulations and standards of
the respective country are to be considered.
Technical Specifications
Network communication
·
Ethernet:
10BaseT (10 Mbit/s)
·
Supported Internet Protocols:
ARP, ICMP, IGMP, UDP/IP, DHCP
·
KNXnet/IP according to KNX System Specification:
Core, Device Management
Rated voltage
·
Bus: DC 24V (DC 21...30V)
·
Auxiliary power supply:
AC/DC 24V (AC/DC 12...30V)
Power supply
·
Bus voltage: via KNX bus line
·
Operating voltage:
from external SELV power supply AC/DC 24V nominal,
permissible input voltage range:
AC/DC 12 ... 30 V
·
Recommended power supplies:
– DC 24V (before choke) from KNX power supplies
N125/x2
Control elements
·
1 learning button:
for switching between normal operating mode and
addressing mode
·
3 push buttons (Move, Prg/Set, ESC):
on the front side to locally set date and time and to
display IP address, MAC address and firmware version
of the device
Display elements
·
1 yellow LED: Ethernet Link Signal available (LK)
·
1 yellow LED: Data transmission on Ethernet (LA)
·
1 red LED: for monitoring bus voltage and displaying
mode, selected with the learning button
·
LC-Display, 2 rows with 12 characters each to display
date and time
Connections
·
bus line: screwless bus connection block (red-black)
0,6...0,8 mm Ø single core
·
Ethernet / IP network: RJ45 socket
·
auxiliary power:
screwless extra low voltage terminal (yellow-white)
Æ
0,6 ... 0,8 mm Ø single core
Physical specifications
·
housing: plastic
·
DIN-rail mounted device,
width: 2 SUs (1SU = 18mm), height: 55 mm
·
installation: rapid mounting on EN 60715-TH35-7,5 rail
·
weight: approx. 150g
Electrical safety
·
degree of pollution (according to IEC 60664-1): 2
·
protection (according to EN 60529): IP 20
·
overvoltage class (according to IEC 60664-1): III
·
bus: safety extra low voltage SELV DC 24 V
·
the device complies with EN 50 090-2-2
Electromagnetic compatibility
complies with EN 50090-2-2
Environmental specifications
·
climatic conditions: EN 50090-2-2
·
ambient temperature operating: 0 ... + 45
°
C
·
storage temperature: - 25 ... + 70
°
C
·
relative humidity (non-condensing): 5 % to 93 %
Markings
EIB, KNX, CE
CE mark
complies with the EMC regulations (residential and func-
tional buildings), and low voltage regulations
