manualshive.com logo in svg

Siemens IGWiPS200-1, Руководство по установке

Поделиться
Скачать
Siemens IGWiPS200-1 Скачать руководство пользователя страница 34

IGWiPS200-1 

Digital Input Module 

Channels ...............................................................8 
Digital Input Voltage Range.................................5 to 30 Vac/Vdc, reverse polarity protected 
Input Impedance ...................................................20k Ohms 
Input Frequency....................................................DC to 2 Hz 
Channel Isolation..................................................Optical 
Over-Voltage Rating.............................................100 Vac/Vdc maximum 
Power Input ..........................................................12-30 Vdc 
Current Consumption ...........................................30 mA maximum 
Operating Temperature Range..............................-40°C to 70°C (-40°F to 158°F) 
Faceplate Label Color...........................................Blue 
 

Digital (Relay) Output Module 

Channels ...............................................................8 
Output Terminal ...................................................Dry Contact, normally open 
Contact Rating ......................................................250 Vac / 30 Vdc, 2A 
Channel Isolation..................................................Full 
Power Input ..........................................................12-30 Vdc 
Current Consumption ...........................................160 mA maximum 
Operating Temperature Range..............................-40°C to 70°C (-40°F to 158°F) 
Faceplate Label Color...........................................Pink 
 

Analog Input Module 

Channels ...............................................................4 
Range....................................................................4-20 mA 
Resolution.............................................................16-bit 
Input Impedance ...................................................<170 Ohms 
Channel Isolation..................................................None (power supply connections are common with transceivers) 
Reverse Polarity Protected....................................Yes 
Compatibility........................................................2-wire, 3-wire, 4-wire devices 
Over-Voltage Rating.............................................42 Vdc maximum 
Accuracy...............................................................0.2% of full scale 
Repeatability.........................................................0.02% of full scale 
Power Input ..........................................................12-30 Vdc 
Current Consumption ...........................................130 mA maximum 
Operating Temperature Range..............................-40°C to 70°C (-40°F to 158°F) 
Faceplate Label Color...........................................Green 
 

Analog Output Module 

Channels ...............................................................4 
Range....................................................................4-20 mA 
Resolution.............................................................16-bit 
Channel Isolation..................................................Optical 
Short Circuit Protected .........................................Yes 
Compatibility........................................................2-wire, 3-wire, and 4-wire devices 
Accuracy...............................................................0.2% of full scale 
Repeatability.........................................................0.02% of full scale 
Power Input ..........................................................9 to 30 Vdc 
Current Consumption ...........................................130 mA maximum 
Minimum Loop Voltage Drop ..............................10 Vdc 
Operating Temperature Range..............................-40°C to 70°C (-40°F to 158°F) 
Faceplate Label Color...........................................Yellow 
 

 

May 2007 

32

Содержание IGWiPS200-1





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды