Siemens ID Mouse V3.1
User Guide
Installation
and Startup
June 2000 Edition
Page 6
1 Installation and Startup
1.1 System Requirements
•
It is assumed that the PC has Windows98 installed on it and is USB-capable.
The USB capability of the system can be tested by double-clicking the program
Tools\USBREADY.EXE supplied on the CD-ROM.
•
The Siemens ID Mouse should not be connected before the installation.
•
The Windows98 operating system CD is required for the installation.
•
The screen resolution must be set to at least 800x600 pixels with more than 256 colors.
1.2 Installation Instructions
1. The Setup program is started automatically on placing the supplied CD-ROM in the drive.
If the Setup is not started automatically, see step 2.
2. Select “Run” from the “Start” menu and enter the following command:
X:\Setup
where X is the drive letter for your CD-ROM drive.
3. The Setup program guides you through the installation process.
4.
Note:
F
After the installation, you will need to restart the computer, since no logon via the
Siemens ID Mouse has occurred as yet, and no users exist in the User Manager.
5. After the Siemens ID Mouse software has been installed from the CD-ROM, the Siemens
ID Mouse can be connected.
If you connected the Siemens ID Mouse before the installation, you can load the required
drivers from the Siemens ID Mouse installation CD.
1.3 Startup
After installing the Siemens ID Mouse, the following programs can be called via the
“ID Mouse” item on the Start menu:
User Manager
management of users
Readme
brief information
Screen Saver
screen saver
Uninstall ID Mouse
program to uninstall the Siemens ID Mouse
User Guide
opens the User Guide
In order to enable a fingerprint logon after starting the computer, the appropriate users must
be added to the archive with the aid of the “User Manager” program.
The Siemens ID Mouse is activated on restarting the computer and requests the user to
provide a fingerprint identification.
