en
Time-setting options
16
The cooking time has elapsed
A signal sounds. The
,
symbol flashes and the
=
symbol goes out. The oven stops heating. Press the
x
and
y
buttons and turn the function selector and the
thermostat to the off position. The oven is switched off.
Changing the cooking time
1.
Press the
x
button.
2.
Use the
@
or
A
button to change the cooking time.
After a few seconds, the change is adopted.
Cancelling the cooking time
1.
Press the
x
button.
2.
Use the
A
button to reset the cooking time to 0:00.
After a few seconds, the change is adopted. Use the
@
and
A
buttons to adopt the change immediately. The
cooking time is cancelled.
End time
You can change the time at which you wish your dish to
be ready. The oven starts automatically and finishes at
the desired time. You can, for example, put your dish in
the cooking compartment in the morning and set the
cooking time so that it is ready at lunch time.
Ensure that food is not left in the cooking compartment
for too long as it may spoil.
1.
Set the function selector.
2.
Set the temperature selector.
3.
Press the
x
button.
4.
Use the
@
or
A
button to set the cooking time. The
,
and
=
symbols appear.
5.
Press the
y
button.
The time when the dish will be ready is displayed.
6.
Use the
@
or
A
button to delay the end time.
After a few seconds, the oven adopts the settings and
switches to standby. The display shows the time at
which the dish will be ready. The
,
symbol lights up
and the
=
symbol goes out. When the oven starts, the
=
symbol appears.
The cooking time has elapsed
A signal sounds. The
,
symbol flashes and the
=
symbol goes out. The oven stops heating. Press the
x
and
y
buttons and turn the function selector and the
thermostat to the off position. The oven is switched off.
Changing the end time
1.
Press the
y
button.
2.
Use the
@
or
A
button to change the end time.
After a few seconds, the change is adopted.
Note:
Do not change the end time if the cooking time
has already started to count down. Otherwise the
cooking result would no longer be satisfactory.
Cancelling the end time
1.
Press the
y
button.
2.
Use the
A
button to set the end time back to the
current time.
After a few seconds, the change is adopted. The oven
starts. Use the
@
and
A
buttons to start the oven
immediately.
Checking the time settings
If several time-setting options are set, the
corresponding symbols are lit up on the display.
To call up the timer, press the
V
button.
To call up the cooking time, press the
x
button.
To call up the end time, press the
y
button.
The value appears on the display for a few seconds. If
no time-setting option is called up, the time is displayed.
To cancel a cooking time or end time that has already
been set, press the
x
and
y
button at the same time.
Time
After the appliance has been connected to the mains
for the first time or after an extended power cut, three
zeros and
,
flash in the display.
1.
Press the
x
and
y
buttons.
2.
Use the
@
and
A
buttons to set the current time.
After a few seconds, the change is adopted.
Changing the time
Note:
No other time-setting option should be set. By
pressing
x
and
y
simultaneously, the time-setting
options that are already programmed will be cancelled.
1.
Press the
x
and
y
buttons.
A dot flashes in the centre of the display.
2.
Use the
@
or
A
button to change the time.
After a few seconds, the time that has been set is
adopted.
Changing the audible signal
The audible signal can be set to three levels. To do this,
press the
A
button until the desired signal is set.
