Siemens HS958GE.1, Руководство пользователя и инструкции по установке

Страница: 32 / 60

en
Rinsing
32
1.
Remove accessories and cookware from the cook-
ing compartment.
2.
If necessary, detach the shelf supports and remove
them from the cooking compartment.
→ "Rails", Page 37
3. Add 200 ml liquid descaler to the container.
4. Place the container in the cooking compartment.
5. Attach the connecting hose in the cooking compart-
ment on the right-hand side of the socket ​⁠.
6. Position the small tube at the end of the connecting
hose in the container so that all the liquid can be
pumped into the appliance. If required, secure the
small tube onto the container using the clip ​⁠.
7.
Close the appliance door.
21.2 Setting the descaling programme
Requirement:
→
"Preparing descaling", Page 31
1.
Press "Cleaning".
2. Press "Descaling".
The duration cannot be changed.
3. Press "Start".
a
A message stating that you should carry out the ne-
cessary preparatory work for descaling appears on
the display.
4. Confirm the message.
a
The descaling programme starts and the duration
counts down.
a
Once descaling has ended, a signal tone sounds. A
message appears on the display confirming that the
operation has finished.
5. Press ​⁠ to switch the appliance off.
6. → "Preparing the appliance after descaling",
Page 32
.
21.3 Preparing the appliance after descaling
1. Remove the connecting hose in the cooking com-
partment from the socket.
2. Remove the container, with the connecting hose,
from the cooking compartment, then empty and
clean it.
3. Wipe any liquid which has escaped from the cook-
ing compartment floor, then wipe with clean water
and dry with a soft cloth.
4. Attach the shelf supports as required.
→ "Rails", Page 37
22 Rinsing
Rinse the appliance if you have not used operations
with steam for a long time.
If descaling is interrupted, you can no longer set any
operation. To ensure that the appliance is ready for op-
eration again, carry out rinsing.
22.1 Preparing for rinsing
ATTENTION!
If descaling solution comes into contact with the control
panel or other delicate surfaces, it will damage them.
▶
Remove descaling solution immediately with water.
Requirements
¡
The cooking compartment must have cooled down
completely.
¡
Have a large container with a capacity of at least 2
litres ready.
¡
Have a connection hose ready.
→ "Accessories", Page 10
1. Remove accessories and cookware from the cook-
ing compartment.
2. If necessary, detach the shelf supports and remove
them from the cooking compartment.
→ "Rails", Page 37
3. Place the container in the cooking compartment.
4. Attach the connecting hose in the cooking compart-
ment on the right-hand side of the socket ​⁠.