en
Steam
12
Ending reheating
1.
Switch off the appliance.
2.
Empty the water tank and dry the cooking compart-
ment.
→
"After every steam operation", Page 12
8.3 Filling the water tank
WARNING ‒ Risk of fire!
Due to the hot surfaces, vapours from flammable li-
quids may catch fire in the cooking compartment (ex-
plosion). The appliance door may spring open. Hot
steam and jets of flame may escape.
▶
Do not pour flammable liquids (e.g. alcoholic drinks)
into the water tank.
▶
Only fill the water tank with water or with the descal-
ing solution we have recommended.
WARNING ‒ Risk of burns!
The water tank may heat up while the appliance is in
operation.
▶
Wait until the water tank has cooled down from the
previous operation.
▶
Remove the water tank from the tank recess.
Requirement:
The water hardness has now been set
correctly.
→
"Setting the water hardness", Page 20
1.
Press on the water tank and pull the water tank
out .
2.
Press on the water tank lid and unscrew it .
3.
Fill the water tank with water up to the mark .
4.
Press on the water tank lid and screw it on .
5.
Place the water tank back in the opening and press
it down until it clicks into place .
Refilling the water tank
If an audible signal sounds and "Fill water tank" ap-
pears in the display, refill the water tank.
Note:
If you do not refill the water tank, operation of the
appliance continues without steam-assisted cooking.
1.
Remove and refill the water tank.
2.
Refit the filled water tank.
8.4 After every steam operation
The remaining water is pumped back into the water
tank after every operation with steam. Then empty and
dry the water tank and the cooking compartment.
Emptying the water tank
WARNING ‒ Risk of burns!
The water tank may heat up while the appliance is in
operation.
▶
Wait until the water tank has cooled down from the
previous operation.
▶
Remove the water tank from the tank recess.
ATTENTION!
Drying the water tank in the hot cooking compartment
leads to damage to the water tank.
▶
Do not dry the water tank in the hot cooking com-
partment.
Cleaning the water tank in the dishwasher will damage
it.
▶
Do not clean the water tank in the dishwasher.
▶
Clean the water tank with a soft cloth and standard
washing-up liquid.
1.
Press on the water tank.
2.
Pull out the water tank.
3.
Unscrew the lid on the water tank.
4.
Empty the water tank, clean it with detergent and
then rinse it thoroughly with clean water.
5.
Dry all parts with a soft cloth.
6.
Rub the seal on the lid until dry.
7.
Leave the water tank to dry with the lid open.
8.
Place the lid on the water tank and screw it on.
9.
Insert the water tank.
Drying the drip trough
WARNING ‒ Risk of burns!
The appliance becomes hot during operation.
▶
Allow the appliance to cool down before cleaning.
