en
Operating the appliance
16
Starting or interrupting operation
To start operation or to interrupt an operation which has
started running, press the Start/Stop button. The
cooling fan may continue to run after an operation is
interrupted.
Press the On/Off button to delete all settings.
If you open the cooking compartment door during
operation, operation is interrupted. Close the cooking
compartment door to resume operation.
Tip:
You can change this setting in the basic settings.
~
"Basic settings" on page 19
Selecting an operating mode
When you select an operating mode, the appliance
must be switched on.
1.
Press the menu button.
The operating modes menu opens.
2.
Touch the required operating mode.
Depending on the operating mode, different options
are available.
3.
Use the rotary selector to change the selection.
Depending on the selection, change further settings.
4.
Use the start/stop button to start.
The elapsed time appears in the display. The
settings and progress line can be seen.
Setting the type of heating and temperature
After the appliance is switched on, the set suggested
type of heating appears with the temperature. You can
start this setting immediately with the Start/Stop button.
If you want to set another type of heating, proceed as
follows.
For other settings, you can change the values as
follows:
Example in the picture: Top/bottom heating at 180 °C.
1.
Use the rotary selector to change the type of
heating.
2.
Touch the suggested temperature.
3.
Use the rotary selector to change the temperature.
4.
Press the Start/Stop button to start.
The set type of heating and the temperature are shown
on the display.
Rapid heat up
You can use the
c
button to heat up the cooking
compartment particularly quickly.
The rapid heat up function is not possible for all types of
heating.
Suitable types of heating:
To ensure an even cooking result, do not place your
food in the cooking compartment until rapid heat up is
complete.
Applying settings
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heating function cannot be started.
1.
Set the type of heating and temperature.
2.
Press the
c
button.
The
c
symbol appears on the left next to the
temperature. The temperature indicator starts to fill in.
When rapid heating is complete, a signal sounds. The
c
symbol goes out. Place your dish in the cooking
compartment.
Notes
■
If a cooking time has been set, this runs
independently of rapid heating and counts down
immediately when the operation is started.
■
You can use the
l
button to check the current
cooking compartment temperature during rapid
heating.
Cancelling
Press the
c
button. The
c
symbol disappears from
the display.
7RSERWWRP
KHDWLQJ
&
$GGHGVWHDP
7RSERWWRP
KHDWLQJ
PLQV
&
$GGHGVWHDP
:
4D hot air
%
Top/bottom heating
&
Intensive heat
7RS
ERWWRPKHDWLQJ
PLQV
&
$GGHGVWHDP
7RSERWWRP
KHDWLQJ
PLQV
$GGHGVWHDP
ꑛ
&
Содержание HN678G4.1
