Siemens HiPath Series, Руководство пользователя

Страница: 36 / 62

Regulatory information
A31003-W1110-U101-1-7619, February 2007
36
HiPath Wireless Standalone Access Point V1.0, Getting Started Guide
HSAAP_Regulatory.fm
AP2630 Internal Antenna AP, AP2640 External Antenna AP
2.1.4 Certifications of Other Countries
The Standalone Access Point—AP2630 and AP2640 (AP26XX series) has been certified for
use in the countries listed in the table below. When the Standalone Access Point is configured,
the user is prompted to select a country code. Once the correct country code is selected, the
Standalone Access Point is set up with the proper frequencies and power outputs for that
country code.
Optional 3rd Party External Antennas
The AP2640 Standalone Access Point can also be used with optional certified 3rd party
antennas. However, in order to comply with the local laws and regulations, an approval may be
required by the local regulatory authorities.
Other Country Specific Compliance Standards, Approvals and Declarations
Australia and New Zealand
●
AS/NZS 4288 (Radio via EU standards)
●
AS/NZS 60950.1 (Safety)
●
AS/NZS 3548 (Emissions via EU standards – ACMA)
●
IEEE 802.11a/b/g
●
IEEE 802.3af (PoE)
●
EN 300 328-2:2003-04 (2.4 GHz)
●
EN 301 893-1:2003-08 (5 GHz)
●
EN 301 489-17:2002-08 (RLAN)
>
It is the responsibility of the end user to select the proper country code for the
country the device will be operated within or run the risk violating local laws and
regulations.