en
Installation and connection
10
Moving the appliance by the gas line or door handle
Do not move the appliance while holding the gas line;
the gas pipe could be damaged. There is a risk of a gas
leak! Do not move the appliance while holding it by the
door handle. The door hinges and door handle could
be damaged.
Electrical connection
The appliance must only be connected to the mains
electricity supply by specialist personnel. The appliance
must be installed in accordance with the most recent
IEE guidelines (Institute of Electrical Engineers). The
appliance may be damaged if it is not connected
correctly.
Make sure the voltage of the power supply matches the
value specified on the rating plate.
Make sure that the power supply is properly earthed
and that the fuse and the cable/wiring system in the
building is sufficiently dimensioned for the electrical
power of the appliance.
We recommend configuring the power circuit for the
appliance to 16 A.
Always observe the following when laying the
connection cable:
■
Do not pinch or squeeze the cable.
■
Keep the cable away from sharp edges.
■
Do not allow the cable to come into contact with
parts that can reach temperatures of over 50 °C
above room temperature.
:
Warning – Danger of death!
There is a risk of electric shock if you touch live
components.
■
Always make sure your hands are dry when you
touch or hold the mains plug.
■
Only pull out the mains cable by taking hold of the
plug and removing the plug; never pull it out by the
mains cable itself, as this could damage it.
■
Never unplug the mains plug when the appliance is
in operation.
Please note the following information and ensure that:
Notes
■
The mains plug fits the socket.
■
The cable cross section is adequate.
■
The earthing system is properly installed.
■
The mains cable is only replaced by a qualified
electrician (if this is necessary).Spare mains cables
can be ordered from our after-sales service.
■
No power strips/multi-way connectors or extension
cables are used.
■
If using a residual current device, only use one that
bears the mark
z
.
The presence of this mark is the only way to be sure
that it fulfils all the applicable regulations.
■
The mains plug can be accessed at all times.
■
The mains cable is not kinked, crushed, modified or
severed.
■
The mains cable does not come into contact with
heat sources.
Explanatory notes
1
Brown
2
Green and yellow
3
Blue
>
E
