Meat probe
en
13
1.
Press the cooking time.
2.
Reset the cooking time using .
Note:
For operating modes that always require a
cooking time, the appliance resets the cooking time
to the preset value.
3.
Press "Apply".
10.2 Setting "Ready at"
You can delay the time at which the cooking time for
the operation should be ready by up to 24 hours.
Requirements
¡
An operating mode and temperature or setting have
been set.
¡
A cooking time is set.
1.
Press "Ready at".
2.
Use or to delay the time or enter the time dir-
ectly via the number field .
If required, use to reset the adjustment value.
3.
Press "Apply".
4.
Use
to start the operation.
a
The display shows the start time. The appliance is in
standby mode.
a
Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
a
Once the cooking time has elapsed, a signal tone
sounds. A note appears on the display confirming
that the operation has finished.
5.
Once the cooking time has elapsed:
‒
If required, you can select other settings and re-
start the operation.
‒
When the food is ready, use to switch the ap-
pliance off.
Changing "Ready at"
To achieve good cooking results, only change the set
time before the operation starts and before the cooking
time starts counting down.
1.
Press "Ready at".
2.
Use or to change the time or enter the time dir-
ectly via the number field .
3.
Press "Apply".
Cancelling "Ready at"
You can delete the set time at any time.
1.
Press "Ready at".
2.
Use to reset the time.
Note:
For operating modes that always require a
cooking time, the appliance resets the time at which
the cooking time ends to the next possible time.
3.
Press "Apply".
10.3 Setting the timer
The timer runs independently during the operation. You
can set the timer when the appliance is switched on or
off, up to 24 hours. The timer has its own signal tone
so that you can tell whether it is the timer or a cooking
time that has elapsed.
1.
Press the button.
2.
To set the timer, press the relevant time value on
the display, e.g. hour display "h" or minute display
"min".
a
The selected value is marked in blue.
3.
Set the timer using or , or via the adjustment
bar. Or enter the timer time directly via the number
field .
If required, use to reset the adjustment value.
4.
To start the timer, press "Start".
a
The timer counts down.
a
The timer remains visible on the display if the appli-
ance is switched off.
a
When the appliance is switched on, the display
shows the settings for the current operation. The
timer is displayed in the status bar.
a
Once the timer has elapsed, a signal tone sounds.
A note appears on the display confirming that the
timer has finished.
Changing the timer
You can change the timer at any time.
1.
Press the button.
2.
Press "Pause".
3.
Change the timer.
4.
Press "Apply".
Cancelling the timer
You can cancel the timer at any time.
1.
Press the button.
2.
Reset the timer using .
3.
Press "Apply".
11 Meat probe
Cook with precision by inserting the meat probe into
the food and setting a core temperature on the appli-
ance. The meat probe measures the core temperature
inside the food. Once the set core temperature has
been reached in the food, the appliance automatically
stops heating.
11.1 Suitable types of heating with the meat
probe
Only certain types of heating are suitable for use with
the meat probe.
You can use the meat probe with the following types of
heating:
¡
4D hot air
¡
Top/bottom heating
¡
Top/bottom heating gentle
¡
Hot air gentle
¡
Circulated air grilling
¡
Pizza setting
¡
Slow cooking
