Dishes
en
13
Cancelling the cooking time
You can cancel the cooking time at any time.
1.
Press the cooking time.
2.
Reset the cooking time using .
Note:
For operating modes that always require a
cooking time, the appliance resets the cooking time
to the preset value.
3.
Press "Apply".
10.2 Setting the end time
You can delay the time at which the cooking time for
the operation is due to end by up to 24 hours.
Notes
¡
To achieve good cooking results, do not delay the
time once the operation has already started.
¡
Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡
An operating mode and temperature or level have
been set.
¡
A cooking time is set.
1.
Press "Ready at".
2.
Use or to delay the time.
If required, use to reset the setting value.
3.
Press "Apply".
4.
Press
to start the operation.
a
The display shows the start time. The appliance is in
standby mode.
a
Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
a
When the time has elapsed, a signal sounds. A
message appears on the display confirming that the
operation has finished.
5.
Once the cooking time has elapsed:
‒
If required, you can select other settings and re-
start the operation.
‒
When the food is ready, use to switch the ap-
pliance off.
Setting the end time
To achieve good cooking results, only change the set
time before the operation starts and before the cooking
time starts counting down.
1.
Press "End time".
2.
Use or to change the time.
3.
Press "Apply".
Cancelling the end time
You can delete the set time at any time.
1.
Press "End time".
2.
Use to reset the time.
Note:
For operating modes that always require a
cooking time, the appliance resets the time at which
the cooking time ends to the next possible time.
3.
Press "Apply".
10.3 Setting the timer
The timer runs independently during the operation. You
can set the timer when the appliance is switched on or
off, up to 24 hours. The timer has its own signal tone
so that you can tell whether it is the timer or a cooking
time that has elapsed.
1.
Press the button.
2.
To set the timer, press the relevant time value on
the display, e.g. hour display "h" or minute display
"min".
a
The selected value is marked in blue.
3.
Set the timer using or or directly via the adjust-
ment bar.
If required, use to reset the adjustment value.
4.
To start the timer, press "Start".
a
The timer counts down.
a
The timer remains visible on the display if the appli-
ance is switched off.
a
When the appliance is switched on, the display
shows the settings for the current operation. The
timer is displayed in the status bar.
a
Once the timer has elapsed, a signal tone sounds.
A note appears on the display confirming that the
timer has finished.
Changing the timer
You can change the timer at any time.
1.
Press the button.
2.
Press "Pause".
3.
Change the timer.
4.
Press "Start".
Cancelling the timer
You can cancel the timer at any time.
1.
Press the button.
2.
Reset the timer using .
3.
Press "Start".
11 Dishes
The "Dishes" operating mode helps you to use your ap-
pliance to prepare different meals by selecting the op-
timum settings automatically.
11.1 Cookware for dishes
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C. Glass or
glass ceramic cookware is best. The joint should cover
approx. 2/3 of the cookware base.
Cookware made from the following material is not
suitable:
¡
Bright, shiny aluminium
¡
Unglazed clay
¡
Plastic or plastic handles
