Siemens HB86K575IN, Инструкция по эксплуатации

Страница: 14 / 44

14
5.
Set the cooking time using the rotary selector.
6.
Press the † button.
Appliance operation begins. The cooking time starts counting
down.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
x 0:00. You can cancel the signal early by pressing the 0
button.
Opening the oven door during cooking
Operation is suspended.
†
flashes. Press the
†
button again
after closing the oven door. The programme will then continue.
Pausing operation
Press the † button. The oven is paused, † flashes. Press
the † button again, operation continues.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Cancelling operation
Press and hold the † button until “Select function” appears in
the status line. You can make new settings.
Setting a later end time
See the section entitled Time-setting options , Setting a later end
time.
Series of operations
You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.
Can be used with
■
All types of heating
Exception: “MicroCombi gentle” and “MicroCombi intensive”
heating types are not suitable.
■
Microwave
■
Combination operation
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
1.
Press the
2
button.
2
series of operations appears on the status bar. The 1 is
highlighted. The first operation in the series can be set.
2.
Select and set the desired operating mode.
3.
Press the
2
button again.
The 2 is highlighted. The second operation in the series can
be set.
4.
Select and set the desired operating mode.
5.
Press the
2
button again.
The 3 for the third operation in the series is highlighted:
6.
Select and set the desired operating mode.
7.
Press the
†
button.
Appliance operation begins. The operation in the series
currently in progress and the cooking time appear in the status
bar on the left-hand side. On the right, you will see the total
cooking time counting down.
The cooking time has elapsed
A signal sounds. The series of operations is finished. The status
bar shows x 0:00. You can cancel the signal before it has
finished sounding by pressing the 0 button.
Time-setting options
You can call up the time-setting options menu by pressing
the
0
button. The following functions are available:
If the oven is switched off:
■
Setting the timer
■
Setting the clock
If the oven is switched on:
■
Setting the timer
■
Setting the cooking time
■
Setting a later end time
Setting the time-setting options ­ in brief
1.
Press the
0
button to open the menu.
2.
Switch to the required function, using the
¾
or
¿
button. The
setting area is light, the text is dark.
ƒ&
PLQVHF
&RPELQDWLRQ
[
&RRNLQJWLPH
&RPELQDWLRQ
ƒ&
7RS
ERWWRPKHDWLQJ
7RSERWWRPKHDWLQJƒ&
3UHKHDW
6HULHVRIRSHUDWLRQV