Siemens HB84K.52B, Инструкция по эксплуатации, Страница: 11 / 32

11
Changing the basic settings
Your oven has various basic settings. These settings can be
customised to suit your requirements.
The oven must be switched off.
1.
Press and hold the 0 button for approx. 6 seconds.
The current basic setting for signal duration is shown on the
display, e.g. ™‚ƒ for selection 2.
2.
Use the @ or A button to change the basic setting.
3.
Confirm by pressing the 0 button.
The next basic setting appears in the display. You can scroll
through all levels using the
0 button and change the setting
using the @ or A button.
4.
To finish, press and hold the 0 button for approx.
6 seconds.
All basic settings are applied.
You may change the basic settings at any time.
Automatic switch-off
If you do not change the settings on your appliance for several
hours, automatic switch-off is activated. The oven stops heating.
The point at which this occurs depends on the temperature or
grill setting that has been set.
Automatic switch-off is activated
A signal sounds. F8 appears in the display. The oven stops
heating.
Turn the function selector to the off position. The oven switches
off.
Overriding automatic switch-off
So that automatic switch-off is not activated when it is not
wanted, you can set a time period. The oven will heat until this
period has expired.
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
ã=
Risk of short circuit!
Never use high-pressure cleaners or steam cleaners to clean
the oven.
ã=
Risk of burns!
Never clean the appliance immediately after switching off. Let
the appliance cool down.
Notes
■
Slight differences in colour on the front of the appliance are
caused by the use of different materials, such as glass,
plastic and metal.
■
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
■
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Basic setting Selection 0 Selection 1 Selection 2 Selection 3
c0
Brightness of the display lighting - night medium* day
c1 Cooking time signal
The duration of the audible signal once
a cooking time has elapsed.
- approx. 10 seconds approx. 2 minutes* approx. 5 minutes
c2 Clock display
The clock is shown in the display if the
oven is switched off.
only when in
operation*
always* - -
c3 Continuation of operation
Way in which operation continues
once the oven door has been opened
and closed again.
Continue when door shut:
off
*Continue operation with †
off* automatic - -
c4 Waiting time until a setting is applied
- approx. 2 seconds approx. 5 seconds* approx. 10 seconds
c5 Operating voltage
220-230 V* 230-240 V - -
c6 Resetting factory settings
Revert all changes to the basic
settings.
no* yes - -
* Factory setting