Siemens HB65AA 1 Series, Инструкция по эксплуатации

Страница: 10 / 24

10
Before using the self-clean function
The oven must be empty. Remove all pans and unsuitable
accessories from inside the oven.
Clean the oven door and the side surfaces inside the oven
around the area with seals.
:
Risk of fire!!
The remains of food and grease as well as roasting juices can
catch fire. Use a damp cloth to clean the inside of the oven and
the accessories that will be cleaned inside the oven.
Cleaning of the accessories
For optimum cleaning of the oven interior, it is recommended
that the self-clean function is not used with the trays.
However, the universal deep enamel tray or the flat enamel
oven tray can only be cleaned using the self-clean function on
level 2.
The shelf should not be cleaned using the self-clean function.
Use water to clean food remains, oil and roasting juices from
the accessories.
:
Significant health risks!
Do not place non-stick baking tins or trays in the oven during
self-cleaning. The intense heat removes the non-stick surface
and creates toxic gases.
Setting
Once the cleaning level has been selected, set the oven.
1.
Select the Self-cleaning
x
function with the function control
knob.
2.
Select the cleaning level with the temperature control knob.
The time when the cleaning will be finished is displayed and
the
N
arrow is displayed in front of the
y
symbol. Self-cleaning
starts within a few seconds. The duration is displayed, and
the
N
arrow is displayed in front of the
x
symbol. The
y
symbol switches off.
The oven door locks shortly after the function has started. The
H
symbol lights up on the display panel. Only when the
H
symbol turns off can the oven door be opened again.
Self-cleaning has ended.
The display panel will show ‹ : ‹‹ . The oven will stop heating.
Turn the function control knob to the zero setting. The oven
switches off. The oven door can be opened again when
the H symbol on the display panel turns off.
Changing the cleaning level
The cleaning level cannot be changed once it has started.
Stopping the self-cleaning
Turn the function control knob to the zero setting. The oven
switches off. The oven door can be opened again when
the H symbol on the display panel turns off.
Delaying the end time
The oven can be set to end the self-cleaning at a specific time.
Self-cleaning can therefore be programmed at night for
example, leaving the oven free for use during the day.
Programme as described in point 1 and 2. Before the cleaning
starts, put back the end time with the
@
or
A
buttons.
The oven is set to standby. The time when the cleaning will be
finished is displayed and the
N
arrow is displayed in front of
the
y
symbol. When the cleaning starts, the cooking time
progress is displayed and the
N
arrow is displayed in front of
the
x
symbol. The
y
symbol switches off.
After using the self-clean function
Once the inside of the oven has cooled, clean the ash remains
using a damp cloth.
Care and cleaning
If cleaned and properly cared for, your oven will keep its bright
appearance and operating performance for many years to
come. Advice on how to care for and clean your oven is
provided below.
Notes
■
Different colours may be seen in your front panel due to the
various materials used in its manufacture, such as glass,
plastic and metal.
■
Dark patches in the door's glass panel may seem to be dirt
but they are in fact reflections from the oven light.
■
Enamel burns at very high temperatures. This may cause
slight discolouration. This is normal and does not affect the
oven's operation. The edges of thin baking trays may not be
completely enamelled. They may therefore feel slightly rough,
although their corrosive protection will be unaffected.
Cleaning products
Follow the indications provided in the table to avoid damaging
the various oven surfaces by using unsuitable cleaning
products. Do not use
■
abrasive or acidic cleaning products
■
strong products containing alcohol
■
scourers or hard sponges
■
high-pressure or steam cleaners.
Wash new dishcloths thoroughly before use.
Zone Cleaning products
Front panel Hot water and a little soap:
Clean with a dishcloth and dry with a soft
cloth. Do not use a glass cleaning prod-
uct or a glass scraper.
Stainless steel Hot water and a little soap:
Clean with a dishcloth and dry with a soft
cloth. Immediately remove any water
marks, grease, cornflower or egg white
stains since corrosion could occur under-
neath these marks or stains.
Special products for the care of stainless
steel which are suitable for hot surfaces
may be obtained from Technical Assist-
ance Service centres and specialist retail
outlets. Use a very fine soft cloth to apply
the cleaning product.