Siemens HB24D.52., Инструкция по эксплуатации

Страница: 8 / 24

8
Time-setting options
Your appliance has many different time-setting options. You can
use the
0
button to access the menu and switch between the
individual options.
All the time symbols are lit during the time when you can make
settings. The N arrow shows you the time-setting option that is
active.
A time-setting option that has already been set can be changed
directly using the @ or A button when the N arrow is next to the
time symbol.
Checking the time-setting option
Press the
0
button repeatedly until the
N
arrow is in front of the
particular symbol. The display shows the value for a few
seconds.
Setting the timer
You can use the timer as a kitchen timer. It runs independently
of the cooking operation. The timer has its own signal. In this
way, you can tell whether it is the timer or a cooking time which
has elapsed.
1.
Press the 0 button.
The time symbols light up in the display; the N arrow is in
front of the
V
.
2.
Use the @ or A button to set the timer.
Default value for the @ button = 10 minutes
Default value for the
A
button = 5 minutes
After a few seconds, the timer duration set is applied. The
timer starts. The N V symbol for the timer appears, and the
time can be seen counting down.
Changing the timer duration
Use the @ or A button to change the timer duration. After a few
seconds, the change is applied.
Once the timer duration has elapsed
A signal sounds. ‹ : ‹‹ appears in the display. Switch the timer
off with the
0
button.
Cancelling the timer duration
Use the
A
button to reset the timer duration to
‹
:
‹‹
. After a
few seconds, the change is applied.
Setting the cooking time
The cooking time sets the length of time your dish will be
cooked for. When the cooking time has elapsed, the cooking
operation is ended automatically.
Example in the picture:
Cooking time of 45 minutes.
Prerequisites:
An operating mode and temperature have been set.
1.
Press the 0 button repeatedly until the N arrow is in front of
the
x
cooking time.
The time symbols light up.
‹
:
‹‹
appears in the display.
2.
Use the @ or A button to set the cooking time.
Default value for the
@
button = 30 minutes
Default value for the A button = 10 minutes
3.
Press the
†
button.
The appliance heats up. The cooking time starts counting
down in the display. The Nx symbol lights up.
In the é Steam operating mode, the cooking time does not
start counting down until the heating-up time has finished.
Changing the cooking time
Use the @ or A button to change the cooking time. If the timer
has been set, first press the
0
button.
After a few seconds, the change is applied.
The cooking time has elapsed
A signal sounds. The appliance stops heating. Press the
0
button to stop the signal. To switch off the appliance, turn the
operating mode and temperature selectors back to
Û
. Open the
appliance door carefully. Hot steam will escape.
Setting a later end time
You can delay the time at which you wish your dish to be ready.
The appliance starts automatically and is ready at the desired
time. You can, for example, put your dish in the compartment in
the morning and set the cooking time so that it is ready at
lunchtime.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
For some programmes it is not possible to change the end
time.
In the
é
Steam operating mode, the cooking time does not
start counting down until the heating-up time has finished. The
selected end time is delayed by the length of the heating-up
time.
Example in the picture:
it is 10:30, the dish will take 45 minutes to cook but should be
ready at 12:30.
Prerequisites:
An operating mode and temperature have been set.
1.
Press the
0
button repeatedly until the arrow is in front of the
cooking time, like this: Nx .
2.
Use the
@
or
A
button to set the cooking time.
3.
Press the
0
button.
The
N
arrow is in front of
y
(End time). The time at which the
dish will be ready is displayed.