Rails
en
13
4.
Remove any items from the cooking compartment.
The cooking compartment must be empty.
5.
Use the function selector to set
3D hot air
.
6.
Use the temperature selector to set the temperature.
a
The appliance starts heating after a few seconds.
7.
Switch off the appliance after one hour.
8.
Once the appliance has cooled down, wipe the
cooking compartment with a damp cloth.
Note:
Reddish marks may appear on the self-clean-
ing surfaces. This is not corrosion but rather residue
from food that contains salt. Food ingredients such
as sugar and egg white are not removed from the
surface coating and may stick to the surface. These
spots are not harmful and do not impair the clean-
ing ability of the self-cleaning surfaces.
9.
Attach the shelf supports.
→
11 Rails
To clean the rails and cooking compartment thor-
oughly, you can remove the shelf supports.
11.1 Unhooking the rails
WARNING ‒ Risk of burns!
The rails can be very hot.
▶
Never touch the rails when they are hot.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
1.
Lift the front rail upwards and unhook it.
2.
Then push the entire rail to the front and remove it.
11.2 Attaching the rails
1.
First insert the rail into the rear socket, press it to
the back slightly
2.
and insert it into the socket at the front.
The rails fit both on the left and right sides. Shelf po-
sitions 1 and 2 are located at the bottom and shelf
positions 3, 4 and 5 are located at the top. Pull out
the telescopic rail towards the front.
