51
Configuring the base station
talk&surf V.6 / englisch / A31008-X100-B100-1-76D1 / Einstellen.fm / 17.09.2003
ì
In the
Receive MSN
section, select all the MSNs the device is to react to for incoming
calls. To do this, activate the MSNs in the
On
column.
ì
Make any further changes you want:
– Enter a
device name
with up to 16 characters.
– Select
Authorisation
. The default authorisation is
Unrestricted
.
– In the
Receive MSN
section click the
Ring delay
column. Select the number of
rings for each MSN.
– Activate the
Call waiting
option to permit "call waiting" for a second call.
– Activate the
Hunt group
option to add the device to the internal call all group.
– Activate the
Auto. seizure
option to get the outside line when you pick up the
receiver.
– Activate the
Send MSN selection after seizure
option, if you want to dial the
Send MSN
before each call.
ì
Click
Apply
.
The new settings will be sent to the base station. The device list will now be updated.
Detailed description
Further information
"Entering multiple subscriber numbers (MSN)" on page 53
"Assigning a Bluetooth mobile telephone to an internal device" on page 23
i
A registered Bluetooth mobile telephone is entered in the MSN list of the
MSN Settings tab as GSM. An internal device can use GSM as the Send or
Receive MSN.
You will find more information about this topic in Chapter "Assigning a
Bluetooth mobile telephone to an internal device" on page 23.
i
If you want to change the settings for several devices, you can select the
device list rows without clicking
Apply
. Your changes remain unaffected
while switching between devices.
