87
Configuring Advanced Settings
Gigaset SX762 WLAN dsl / en / A31008-M707-L101-1-7619 / configure_router.fm / 15.05.2007
Sc
hablone 200
5_05_
02
ì
Choose
On
for
Remote FTP service
if you also want to make data available on the
Internet.
Internet users can access your USB mass storage by entering the public IP address in
the Internet browser. As Internet service providers often change this each time
someone dials in, it is worth using dynamic DNS (page 61) in addition.
ì
The
Port
field contains the port number via which local PCs and Internet users can
access your data. You should not change the default port number without very good
reason.
If you use a different port number, note that active FTP mode is then no longer pos-
sible. The FTP clients then have to be converted to passive FTP mode.
You can allow access for both FTP services generally or only for selected users with a
user name and password.
ì
For
Access (read only)
, select whether all users are to be able to read your data in
Anonymous
mode or whether only one
Specified user
is to be allowed.
ì
Specify whether
Access (full control)
to your data is
disabled
or whether a
Specified user
may read, edit and delete your data.
ì
Enter the name in the
Specified user
field. Define different user names for the dif-
ferent types of access and directory.
ì
Enter the password for the user and confirm it by entering it again in the field below.
Please note that this is case-sensitive. Avoid using proper names and obvious terms.
Instead, use uppercase and lowercase letters, numbers and special characters.
ì
Click
OK
to apply the changes.