16
First steps
Gigaset SX762 WLAN dsl / en / A31008-M707-L101-1-7619 / device_762.fm / 15.05.2007
Sc
hablone 200
4_08
_26
System requirements
You require the following components to operate your Gigaset SX762 WLAN dsl:
u
A PC with
– an 802.11g or 802.11b compatible wireless
or
– an
port (10Base-T or 100Base-TX).
A Web browser such as Microsoft Internet Explorer V 6.0 or higher or Mozilla Firefox
V 1.0 or higher for configuring your Gigaset SX762 WLAN dsl.
u
To access the Internet you require
– a DSL port (splitter),
– the access data for your
.
u
For Internet telephony you also require
– the access data for your VoIP service provider and
– a phone for connecting to the Gigaset SX762 WLAN dsl or a PC with a SIP client
or a VoIP telephone.
Trademarks
Microsoft, Windows 98/SE, Windows ME, Windows 2000, Windows XP and Internet
Explorer are registered trademarks of the Microsoft Corporation.
Mozilla Firefox is a registered trademark of the Mozilla Organisation.
Note:
An 802.11b-compatible network adapter has a maximum transmission speed of
11 Mbps. An 802.11g-compatible network adapter has a maximum transmission
speed of 54 Mbps.
Note:
We recommend you use the Gigaset SX762 WLAN dsl with the Windows XP operating
system because only then are all system requirements for using the device fulfilled.
For experienced users
The default settings for the Gigaset SX762 WLAN dsl are:
– IP address: 192.168.254.254
– Subnet mask: 255.255.255.0
– SSID: ConnectionPoint
– Radio channel: 6
– Default password of the configuration user interface: admin
Caution:
By default there is no encryption active. Please be sure to make your network
secure. You will find information about this in the section entitled "Configuring wire-
less connections" on page 67.