Siemens Gigaset SL780, Инструкция по эксплуатации

Страница: 73 / 97

72
Connecting the base to the PABX
Gigaset SL785 / GBR / A31008-M2009-L101-2-7619 / pabx.fm / 25.03.2009
Ve
rs
io
n 4, 16.0
9.20
05
Connecting the base to the
PABX
The following settings are only necessary
when your PABX requires them; see the
PABX user guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Dialling modes and recall
The current setting is indicated by
Ø
.
Changing the dialling mode
The following dialling modes can be
selected:
u
Touch tone dialling (DTMF)
u
Dial pulsing (DP)
v
¢
Ï
¢
Telephony
¢
Dialling Mode
s
Select dialling mode and press
§Select§
( Ø = selected).
Setting recall
Your phone is preset at the factory for
operation on the main connection. For
operation on a PABX, you may have to
change this value. Please refer to the user
guide for your PABX.
v
¢
Ï
¢
Telephony
¢
Recall
s
Select recall and press
§Select§
.
(
Ø
= set value). Possible
values are:
80 ms, 100 ms, 120 ms,
180 ms, 250 ms, 300 ms,
400 ms, 600 ms, 800 ms.
Saving an access code
(outside line code)
Precondition: You may have to enter an
access code for external calls in your PABX,
e.g. "0".
v
¢
Ï
¢
Telephony
¢
Access Code
~
Enter or change access code,
max. 3 digits.
§Save§
Press the display key.
If an access code has been saved:
u
The access code is prefixed automati-
cally when you select from the follow-
ing lists: numbers of the SMS centres,
call list or answering machine list.
u
The access code must be entered when
dialling manually and when manually
entering directory, emergency/quick
dial numbers and SMS centre numbers.
u
If you copy the recipient's number from
the directory when sending an SMS,
you have to delete the access code.
u An existing access code is deleted
using
Ñ
.
Setting pauses
Changing pause after line seizure
You can change the length of pause that is
inserted between pressing the talk key
c
and sending the number.
v
Open the main menu.
*#Q5# L
Press keys.
~
Enter digit for the pause
length ( 1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec.) and press
§OK§
.