Gigaset SE681 WiMAX / Gigaset SX682 WiMAX / Beibl./USA / A31008-N920-R302-1-ZD43 / Sec_FCC_681_682_ohneBC.fm / 7.7.08
Sc
hablone 2
007_
10_1
9
Safety and Certifications - Important Information about the
Gigaset SE681 WiMAX / Gigaset SX682 WiMAX
Installation and Safe Usage Instructions
1. Place the Gigaset DSL gateway in a horizontal orientation on a flat surface.
2. Connect the manufacturer supplied AC to DC power adapter.
The Gigaset SE681 WiMAX / Gigaset SX682 WiMAX requires the use of a 9 VDC, 1.0 A power
adapter. Only use a manufacturer supplied and approved power adapter.
3. Connect the Ethernet cable (provided) to an RJ45 port on the Gigaset DSL Gateway labeled
"Ethernet". Then connect the other end of the Ethernet Cable then to the Ethernet port of a
computer. Repeat as necessary for the available Ethernet ports.
4. If a USB port is available, connect the "B" end of the provided USB cable to the port on the
Gigaset DSL Gateway labeled "USB". Then connect the "A" end of the USB Cable to the USB host
port of a computer.
5. Connect the provided DSL Cable to the port on the Gigaset DSL Gateway labeled "DSL". Con-
nect the other end of the DSL Cable to a standard Phone Jack.
Always use a DSL cable with a minimum wire gauge of 26AWG (0.4 mm dia. or
0.129 mm
2
).
6. If using a USB port, use the Gigaset CD to configure the computer's USB connection.
Power Outage: In the event of a power outage, Gigaset SE681 WiMAX / Gigaset SX682
WiMAX will not operate. You should have a telephone that does not require electricity avail-
able for use during power outages.
When using this device, basic safety precautions should always be followed to reduce the risk of
fire, electric shock, and injury to persons including the following:
1. Do not use this product near water and avoid contact with moisture. For example, do not use
near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming
pool. Care should be taken so that liquids are not spilled on this equipment.
2. Never insert objects into the vents of this equipment as this can result in the risk of electrical
shock or fire.
3. This equipment should only be operated with the power supply provided with the product.
4. Do not overload wall outlets or extension cords. Doing so can result in the risk of fire or elec-
trical shock.
5. Avoid blocking any vent openings or exhaust exits on this equipment. Do not place equipment
in a built-in installation such as a cabinet that may impede the flow of air through the ventila-
tion openings.
6. The equipment should be situated away from heat sources such as radiators, heat registers,
stoves, or other heat producing appliances and equipment.
7. Care should be taken to ensure that the power cord is routed, so it is not likely to be walked on
or pinched by items placed upon or next to it.
8. Unplug this equipment before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning only.
9. This equipment is not user serviceable and is to be serviced by qualified personnel only. Do
not disassemble this equipment. If service is required, disconnect all power and phones lines
from the equipment and consult qualified service personnel.
Save these Instructions!
Содержание GIGASET SE681 WIMAX
Страница 2: ......
