Siemens Gigaset S685 IP Скачать руководство пользователя страница 18

Страница: 18 / 278

First steps

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / starting.fm / 5/18/09

ion 8,

.09

.200

Initial charging and discharging of the batteries

Remove the handset from the charging cradle and do not replace it until the

batteries are fully discharged.
The charge status is displayed in the idle display.

(flat to full).

flashes, the batteries are almost flat.

After the first battery charge

and

discharge, you may place your handset in the

charging cradle after every call.

Setting the date and time

The date and time must be set in order to have the correct time for incoming

calls and to be able to use the alarm clock and calendar.

If the date and time on the phone have not yet been set, the

§Time§

display key

will appear.

Setting up manually:

Place the handset in the charging cradle and wait until the

batteries are fully charged (approx.

hours).

If the handset is activated, the flashing battery icon

the top right of the display indicates that the batteries are

being charged.

10 h

Warning

Always repeat the charging and discharging procedure if you remove the

batteries from the handset and reinsert them.

The batteries may warm up during charging.

This is not dangerous.

After a while, the charge capacity of the batteries will decrease for technical

reasons.

Please note

The address of a time server on the Internet is stored on your telephone.

The date and time are taken from this time server provided that the base sta-

tion is connected to the Internet and synchronisation with the time server is

activated

(

Page 214

). Manual settings are overwritten in this case.

Press the key below

§Time§

on the display

(= right display key).

Time

Содержание Gigaset S685 IP























































































































































































































































































Результаты поиска

Содержание Gigaset S685 IP

Отзывы:

Похожие инструкции для Gigaset S685 IP

Бренды по названию

Популярные бренды

Siemens Gigaset S685 IP, Руководство пользователя

Результаты поиска

Содержание Gigaset S685 IP

Отзывы:

Похожие инструкции для Gigaset S685 IP

Бренды по названию

Популярные бренды