44
Opening lists with the message key
CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / directories_charges.fm / 02.03.2007
Ve
rs
ion 2,
21
.12.
2006
Opening lists with the message key
You can use the message key
f
to open the following lists:
u
Network mailbox, see page 47
Preconditions: Your network provider supports this function and the network mailbox is
configured for fast access (page 47).
u
Calls list
An advisory tone sounds as soon as a
new message
arrives in a list. The message key
f
flashes. In idle status, the display shows an icon for the new message.
The number of new entries is shown beneath the corresponding icon.
When you press the flashing key
f
, you will see all the lists that contain new messages.
If only one list contains new messages, this will be opened automatically.
Calls list
Depending on the type of list set, the calls list contains
u
all incoming and outgoing calls
u
missed calls only
The numbers of the last 30 calls are saved.
Multiple calls from the same number will be stored once in the list of missed calls (the latest
call).
Multiple calls from the same number are stored several times in the list of answered calls.
The calls list is displayed as follows:
Number of new e number of old, read entries
Icon
New message...
Ã
... in the network mailbox
Á
... in calls list
Please note:
If calls are saved in the network mailbox you will receive a message if the appropriate settings have
been made (see the network mailbox instructions of your VoIP provider).
Please note:
– Only calls to the receiving numbers assigned to a handset are stored in a handset's calls list
– If no receiving numbers are assigned, all calls will be stored in the calls list for all handsets.
Calls List: 01+02