37
SMS (Text Messages)
Gigaset C100 / englisch / A31008-C100-J101-1-7619 / SMS_Neutral_so.fm / 24.06.2003
Adding the telephone number of a text message to the directory
You can add the telephone number to your directory.
Precondition:
You have opened the incoming message list and selected a message
Text messages
to PABX's
You can only receive a text message when the Calling Line Identification is for-
warded to the extension of the PABX (CLIP).
The CLIP of the number of the SMS centre is evaluated in the
Gigaset
(telephone).
If your phone is connected to a PABX, you may have to prefix the number of the SMS
centre with the access code (this depends on your PABX). If in doubt, you can test your
PABX by sending a text message to your own number and putting the access code
before the number of the SMS centre. If you do not receive the message, send another
one, this time without the access code.
When you send messages, your sender number may be sent without your extension
number. The recipient cannot reply to you directly in this case.
Text messages can only be sent and received through
ISDN exchanges
with the MSN
number assigned to your base.
[_______________]
MENU
Press the display key to open the menu.
[__________] [_____________________________________________________________]
Copy to Directory
[_________]
OK
Select the menu item and confirm.
[________]
OK
Confirm the telephone number.
Enter a name (up to 16 characters) (for inputting text
[_______________]
MENU
Press the display key to open the menu.
[_____________________________________________________________] [__________]
Save Entry
OK
Confirm.
Long
press (back to idle status).
i
The number must be stored in the directory together with its area code
(prefix) so that it can also be used for sending text messages.
