44
Using the directory and other lists
S1_SL1 / englisch / A31008-M373-B103-1-7619 / directories.fm / 08.06.2004
To
change
the voice pattern, you must delete it (page 45) and record it again.
Using voice-activated dialling
:
The display prompts you to speak. Speak the voice pattern, e.g.
Anna
. If the name
matches the recorded voice pattern, it is repeated. The phone number is dialled.
Announcing the caller's name
When you receive an external call, you hear the ringer and the telephone announces the
caller's name.
Precondition:
Calling Line Identification is active (page 23) and you have recorded a
voice pattern for the incoming number (page 43).
Activating/deactivating the name announcement
Play the voice pattern
Open the directory for voice-activated dialling (see
Step 1
Now:
i
◆
If your two recordings are
too different from each other
, you will be
prompted to repeat them.
◆
A message tells you if your speech pattern is
too much like
another
user's. Close this message with
, go back to the start of the voice
pattern recording sequence and repeat the recording.
Ý
t
Hold
down.
v
Open the menu.
s
Audio Settings
Select the menu item and confirm.
s
Ringer Settings
Select the menu item and confirm.
Ext. Calls
Confirm. You hear the current volume.
s r
Scroll
to
the
Announce
line and activate/deactivate
the name announcement.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
Save
Now press the display key to confirm the setting.
a
Long
press (back to idle status).
OK
OK
OK
s
Select the marked entry with
´
.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
Play
Press the display key.
a
Long
press (back to idle status).