32
Making comfort calls
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
giga3070KAP.fm
09.01.01
Step
by
Step
Internal call forwarding
Configuring a forwarding destination
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Int.forwarding
→
Forward. dest.
→
(required internal subscriber).
Only one forwarding destination can be selected for internal call forwarding.
Activating/deactivating internal call forwarding
Internal call forwarding can only be activated if a forwarding destination exten-
sion has been configured.
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Int.forwarding
→
Activate
or
Deactivate
Defining the number of ring cycles
Ring delay is used to define the number of ring cycles to be completed before
a call is forwarded. Between 0 to 9 ring cycles can be configured.
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Int.forwarding
→
No. of Rings
Enter the number of ring cycles and confirm with [OK].
External call forwarding - CF
Both telephone lines assigned to your ISDN connection are free during call for-
warding. If call forwarding is configured, it is activated at the provider exchange.
The call is not signalled at your telephone. You must pay the connection costs
together with a surcharge. You can define the following conditions for call for-
warding:
Immediately — On busy — On no reply
Configuring a new call forwarding destination
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Ext. Call Forw.
Select using [
] and [
9
]: (
required call forwarding).
Select using [
] and [OK]:
New entry
→
(MSN for which
call forwarding should apply)
→
Immediately, On busy
or
On no reply
.
Enter the required destination call number and confirm with [
9
].
Select using [
] and [OK]:
Save entry
.
Confirm the prompt with [YES]: Call forwarding is activated.
or
Confirm the prompt with [NO]: Call forwarding is not activated.
Activating/deactivating external call forwarding
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Ext. Call Forw.
Select using [
] and [
9
]:
(required call forwarding).
Select using [
] and [OK]:
Activate
or
Deactivate
1.
2.
1.
2.
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
7.
1.
2.
3.
4.S
