Siemens Gigaset 2011 Tango Скачать руководство пользователя страница 5

Страница: 5 / 82

KAP01.FM5

18.7.99

Gigaset 2011 Tango: A30852-X1106-B307-2-7619

Safety precautions

●

Do not submerge batteries in water; do not throw

them into fire.

●

Do not dispose of old, defective batteries with normal

household garbage.

●

Batteries become warm during charging. This is nor-

mal and not dangerous

●

Do not use any third-party charging units. The batter-

ies could be damaged.

●

Use only the supplied power adapter number

C39280-Z4-C59 (220/230V version) or

C39280-Z4-C69 (110/120V version).

●

Do not confuse the plugs of the base station. Abnor-

mally high voltages could be imposed across the

charging contacts for brief intervals, such as during

thunder storms.

●

The handset may not be operated in rooms with ex-

plosion hazards.

Only use approved nickel-cadmium (NiCd) and

nickel-metal-hydride (NiMH) batteries

(

➔

page 62)!

Never

use other batteries or ordinary (non-re-

chargeable) batteries! These batteries can short

circuit or destroy the battery unit (dangerous).

The following labels are found on the battery

compartments of the handset and charging unit:

Check that the socket into which you insert the

plug-in power unit has the correct voltage. If

your plug-in power unit does not have the right

voltage, please contact Siemens.

Research has demonstrated that cordless tele-

phones (DECT) which are switched on can inter-

fere with the operation of medial equipment.

When using a mobile telephone in medical insti-

tutions, the regulations of the institution in ques-

tion must be observed.

Only use rechargeable bat-

teries with the poles aligned

as shown!

Type according to instruc-

tions

Содержание Gigaset 2011 Tango



















































































Результаты поиска

Содержание Gigaset 2011 Tango

Отзывы:

Похожие инструкции для Gigaset 2011 Tango

Бренды по названию

Популярные бренды

Siemens Gigaset 2011 Tango, Руководство по эксплуатации

Результаты поиска

Содержание Gigaset 2011 Tango

Отзывы:

Похожие инструкции для Gigaset 2011 Tango

Бренды по названию

Популярные бренды