GAMMA wave
Technical Product Information
February 2007
Switch actuator wave GE 561/01
5WG3 561-4AB01
Technical Manual
wave GE 561/01, 6 pages
Siemens AG
Automation and Drives Group
Update: http://www.siemens.de/gamma
©
Siemens AG 2007
Electrical Installation Technology
Subject to change without prior notice
P.O. Box 10 09 53, D-93009 Regensburg
2.20.8.1/2
Electromagnetic compatibility
•
complies
with
EN
300220,
EN 301489, EN 60669-2-1
Environmental specifications
•
Climatic conditions: EN 50090-2-2
•
Ambient operating temperature: - 5 + 45°C
•
Storage temperature: - 25 +70°C
•
Relative humidity (non-condensing): 5% to 93%
Certification
•
complies
with - standard
- radio frequency wave
- easy mode push button EP
CE norm
complies with the EMC regulations, low voltage regula-
tions and R&TTE regulations
SIEMENS AG hereby states that the switch actuator
wave GE 561/01 is in compliance with the basic re-
quirements and the other relevant provisions of Regula-
tion 1999/5/EC.
The CE declaration can be inspected at:
SIEMENS AG
Siemensstraße 10
93055 Regensburg, Germany
Installation instructions
Caution:
•
Installation of the device in metal walls and ceilings
should be avoided, since the range of radio control is
thereby substantially reduced.
•
Occasionally the transmission range may be influ-
enced by structural factors (e.g., reinforced concrete)
or electric/electronic sources of interference.
•
A distance of at least 1 m must be maintained be-
tween the transmitter and the relevant receivers.
•
Although the radio transmission occurs in the safe
868 MHz frequency band, interference in the radio
transmission cannot be ruled out.
•
The radio transmission used is not suitable for secu-
rity applications.
V
DANGER
•
The device may be used only in dry interior rooms,
for installation in equipment, housings or under cov-
ers.
•
The device must be mounted and commissioned by
an authorized electrician.
•
The device must not be opened.
•
The prevailing safety and accident regulations must
be observed.
•
In the planning and installation of electric facilities,
the relevant regulations, provisions and terms of the
respective country must be observed.
•
An insulated tool (e.g. a screwdriver with insulation)
should be used to operate the pushbutton.
Mounting
General description
The device is attached with two screws 4 mm
∅
(bore
spacing 251 mm central).
Opening the terminal chamber (Diagram B)
Press the snap-in lever (B1) down and outwards (black
arrow) and flip up the cover of the terminal chamber
(B2).
Closing the terminal chamber (Diagram B)
Press down and snap in the cover of the terminal cham-
ber (B2) and screw in the locking screw (B3).
B2
B1
5
1
2 L1
3 N
4 L2
A
B
5WG3 561-4AB01
GAMMA wave
Schaltaktor wave GE 561/01
Switch actuat or wave GE 561/01
Un ~ 230V / In 16A / 50Hz
Made in Germany
µ
µ
EP
~230V
!
B1
B2
B3
Diagram B
