Power supply (70 W) FP2001-A1
3
Technical data
25
Building Technologies
008837_q_en_--
Fire Safety
14.05.2012
3.5
Technical data
Mains supply
Voltage
AC 85…265 V, 50/60 Hz
Current
0.5…1 A
Power consumption
Max. 90 VA
Supply output (System)
Designation
'Usys'
Voltage
DC 20…28.6 V (depending on charge and
temperature)
Current:
Maximum nominal output current
with battery charge (I
max a
)
0.9 A
Maximum nominal output current
without battery charge (I
max b
)
2.5 A
Minimum output current (I
min
)
0.05 A
Performance
70 W
Ripple
Max. 2.5 %
Supply output (Battery)
Designation
'Akku'
Voltage
DC 21…28.6 V (depending on charge and
temperature)
Charging current
Max. 1.6 A (the charging current is reduced at full
load)
Connectable batteries
2 x 12 V / 7…17 Ah (all battery types recommended
by Siemens in acc. with document 008843)
Load resistance (R
imax
)
Max. 1 (batteries incl. line)
Batteries are monitored for
Short-circuit
Open line
Internal short-circuit
Presence
Low discharge protection
Battery voltage < DC 20.5 V
Monitoring signal Mains fault Designation
'Main'
Active in event of
No mains voltage (signal within 10 s)
Design
Open collector
Monitoring signal Battery fault Designation
'Battery'
Active in event of
Battery fault
Battery voltage DC <21.0 V (together with
'Main')
Design
Open collector
Designation
'Convert'
Active in event of
Fault within the power supply
Design
Open collector
Connections
Mains supply, battery supply and
monitoring signals
Plug-type connection
Mechanical data
Dimensions (W x H x D)
95 x 170 x 54 mm
Weight
800 g
Standards and approvals
Standards
EN 54-4:1997
Approvals
VdS G206112
CPD certificate
0786-CPD-20266
CE conformity mark
Yes
