Mounting / Installation
Assembly
5
22 | 32
007063_h_en_--
5 Mounting / Installation
5.1 Assembly
The line separator may be fitted in any position. Ensure that the line separator LED
is visible after mounting.
You can fit the FDCL221 line separator in various ways:
●
Directly on a U-rail TS35
●
With a cable tie on the mounting hole
●
With a screw on the mounting hole
Mounting on a U-rail TS35
Figure 7: Installing the line separator on a U-rail
1 Pair of terminal blocks
l
Mount the line separator to the U-rail.
– Slide the line separator onto the U-rail or
– Press the line separator onto the U-rail. You must be able to hear the line
separator click into place.
If you are mounting several line separators onto the same U-rail, we would
recommend using a pair of terminal blocks (at least 3 sets) after each line
separator. This results in a clear and space-saving form of mounting.
The terminal blocks must be ordered by the party responsible for installation.
For disassembly, simply slide the line separator off the U-rail or bend open the
locking catch on the line separator and remove the device from the U-rail.
The terminal block may feature the following forms of connection:
●
Flat 2.8 x 0.8 mm plug-type connection (preferred choice)
●
Screw terminals or socket strip
●
Soldered connections
1
