1
Operating unit FCM20xx
Mounting and wiring the operating unit
8
Siemens Industry, Inc.
A6V10315030_b_en_--
Building Technologies Division
2013-06-04
Wiring
1. Insert the connection cable to the periphery board into the intended slots (4 and 6).
2. Stick the supplied cable supports (5) into the panel as shown and fix the flat cable.
3. Guide the cables for the operating unit modules (2) to the DIN rail kit (3) as shown
and fix these cables with cable ties.
4. Insert the supplied inscription strips underneath the operating unit film as shown in
the figure below.
5. Swivel the inner door towards the panel and secure it using the locking screw.
Inserting the inscription strips
1
2
3
5
4
Inserting the inscription strips into the operating unit
1
Inscription LEDs
2
Inscription for the standard keys in the center
3
Inscription for standard keys on the right
4
Inscription for LED module (depending on whether operating unit is present or not)
5
Inscription for panel and alarm
firealarmresources.com
