Document ID: 009906_d_en_GB
Edition: 05.2009
2 of 4
Switching off detector zones / detectors
The following example represents a possible operation sequence:
DANGER
System parts that have been switched off make it impossible to detect fires or
faults!
⇒
Fire may spread unhindered.
⇒
The area that has been switched off must be manually supervised.
⇒
System parts that have been switched off must be switched back on as soon as possible.
Switching off a detector zone
(password required)
Step
Result
1.
Press the button
to open the main menu.
(Password required)
⇒
Main menu
Exit with <C>
Access level 2.1
Message summary
Functions
Favorites
Topology
(1)
(2)
(3)
(4)
Element search
Event memory
Log in / logout
Settings / administration
(5)
(6)
(7)
(8)
Function
On/Off
Function
All
LED
Test
2.
Press
<2>
to open the menu item
"Functions"
.
Note:
The numbers in brackets (1)… can be entered
with the numeric keys <1>… below the main
menu button.
⇒
Functions
Exit with <C>
Access level 2.1
On / Off
Test
Activate / deactivate
Information
(1)
(2)
(3)
(4)
Configuration
Maintenance
All functions
(5)
(6)
(7)
Function
On/Off
Function
All
LED
Test
3.
Press
<1>
"On/Off".
⇒
Select element category
Zone
Area
Section
Detector
RT control
(1)
(2)
(3)
(4)
(5)
4.
Press
<3>
"Section".
Note:
A British Standard zone is called a Section in this
system’s.
⇒
Enter address
Zone no ---------
Confirm with <ok> / Exit with <C>
Delete with <Cursor up>
5.
Enter a zone number, if known, or press <ok>
without entering a number.
Note:
The example shows the result, after confirmation
with <ok> without entering an address.
⇒
004 Sections
Second Floor
First Floor
Ground Floor
Basement
Zone no 4
Zone no 3
Zone no 2
Zone no 1
Execute
command
Show
Topology
6.
Scroll with the navigation buttons to the
zone you want to switch off.
The selected zone is marked by a frame.
Press <Softkey 1> "
Execute command
".
⇒
Select command
All zones OFF
MCP zones OFF
Non-MCP zones OFF
(4)
(5)
(6)
7.
Press
<4>, <5> or <6>
according to the zone
types required to be switched off.
⇒
⇒
Command response confirms the execution.
⇒
The zone has been switched off.
⇒
The LED "ISOLATION" is on.
