Siemens ET6 Series, Инструкция по эксплуатации, Страница: 5 / 12

5
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2 .
The control panel
Controls
When you touch a symbol, the respective function is activated.
Note:
Always keep the controls dry. Moisture reduces their
effectiveness.
The hotplates
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
If
•
appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to
œ
. The display remains lit until the hotplate has
cooled sufficiently.
Displays for
heat setting
‚
-
Š
residual heat
•
/
œ
Controls for
#
main switch
#
wipe protection
0
timer
æ
extended cooking zone
Controls for
¤
hotplate
ò
triple-circuit
hotplate
ð
dual-circuit
hotplate
‘
electronic
boil start control
Displays for
timer
Settings range
for setting the
hotplate
for setting the timer
Hotplate Activating and deactivating
$
Single-circuit hotplate
ð
Dual-circuit hotplate Touch the
ð
symbol
ò
Tri-circuit hotplate Touch the
ò
symbol; 2nd filament circuit is activated
Touch the
ò
symbol again; 3rd filament circuit is activated
æ
Extended cooking zone Touch the
æ
symbol
<
Halogen hotplate Note: do not look into the halogen light as the glare may dazzle the eyes
<
Halogen hotplate and
›
(boost), with power
setting
Set hotplate 9, touch 9 again in the settings area.
›
lights up in the display
When the hotplate is activated: the corresponding indicator lights up.
When the hotplate is switched on: the last selected size is automatically selected again