Siemens ET6 FMP1E Series, Инструкция по применению

Страница: 13 / 16

Troubleshooting
en
13
1.
Clean the hob frame with hot soapy water and a soft
cloth. Wash new sponge cloths thoroughly before use.
2.
Dry with a soft cloth.
14 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
WARNING ‒ Risk of burns!
The hotplate heats up but the display does not work.
▶
Switch off the fuse in the fuse box.
▶
Call the customer service.
WARNING ‒ Risk of fire!
The hob switches off automatically and can no longer
be operated. It may switch on unintentionally at a later
point.
▶
Switch off the fuse in the fuse box.
▶
Call the customer service.
14.1 Information on display panel
Fault Cause and troubleshooting
None There has been a power cut.
1. Check the household fuse for the appliance.
2.
Check whether there has been a power failure by trying other electrical appliances.
All displays flash The control panel is wet or objects are lying on it.
▶
Dry the control panel or remove the object.
​⁠ ​⁠
Several hotplates have been used over a prolonged period at high power settings. The hot-
plate has been switched off to protect the electronics.
1.
Wait a while.
2.
Touch any touch field.
a
When the message no longer appears, the electronics have cooled down sufficiently.
You can continue to cook.
​⁠ ​⁠ Despite being switched off by ​⁠ ​⁠, the electronics have become hot again. All hotplates
have therefore been switched off.
1.
Wait a while.
2.
Touch any touch field.
a
When the message no longer appears, the electronics have cooled down sufficiently.
You can continue to cook.
​⁠ ​⁠ and the heat set-
ting flash alternately.
A signal sounds.
Hot pot near the control panel. There is a risk that the electronics will overheat.
▶
Remove the pan.
a
The display goes out shortly afterwards.
​⁠ ​⁠ and audible signal Hot pot near the control panel. The hotplate has been switched off to protect the electron-
ics.
1.
Remove the pot.
2.
Wait a while.
3.
Touch any touch field.
a
When the message no longer appears, the electronics have cooled down sufficiently.
You can continue to cook.
​⁠ ​⁠
The hotplate was on for too long and has switched off automatically.
You can switch the hotplate back on again immediately.