Siemens EQ.500 classic TP5 Series, Руководство пользователя

Страница: 34 / 256

en
Troubleshooting
34
Fault Cause troubleshooting
Appliance is not dispensing
drinks. Air is in the water filter.
1.
Immerse the water filter in water
with the opening facing upwards
until no more air bubbles escape.
2.
Reinsert the filter.
→
"Inserting and activating the wa-
ter filter", Page 21
▶
Firmly press the water filter straight
down into the tank connection.
Residues of limescale re-
mover are blocking the wa-
ter tank.
1.
Remove the water tank.
2.
Clean the water tank thoroughly.
There is dripping water on
the inner floor of the appli-
ance. Drip tray was removed too
soon.
▶
Wait a few seconds after the last
drink was dispensed before remov-
ing the drip tray.
Brewing unit cannot be re-
moved. Brewing unit is not in the re-
moval position.
▶
Switch the appliance back on.
Appliance cannot be oper-
ated.
Change displays. Appliance is in demo mode.
1.
Remove the water tank and fill with
fresh cold water.
2.
Reinsert the water tank.
Grinder won't start. Appliance is too hot.
1.
Disconnect the appliance from the
mains.
2.
Wait 1 hour so the appliance can
cool down.
Grinder is not grinding any
coffee beans despite full
bean container. Beans are too oily and are
not falling into the grinder.
▶
Gently tap the bean container.
▶
Change the coffee variety.
Do not use oily beans.
▶
Clean the empty bean container
with a damp cloth.
Problem with results
Fault Cause troubleshooting
Coffee or milk froth quality
varies widely. Build-up of limescale in the
appliance.
▶
Descale the appliance.
→
"Using the descaling pro-
gramme", Page 29
Milk froth quality varies
widely. Milk froth quality depends
on the type of milk or plant-
based alternative used.
▶
Optimise the result through the se-
lection of the milk or vegetable-
based drink type.