Siemens EQ.5 Extra Class, Инструкция по эксплуатации

Страница: 33 / 116

29
en
Switching off the appliance
The factory settings of the fully automatic
espresso machine are programmed for
optimal performance� The appliance
switches off automatically after a specific
time (time span can be programmed, see
“Menu settings”
Shut off
)�
Exception: The appliance switches off
without rinsing if only hot water or steam
were dispensed�
To switch the appliance off manually before
this, press the
k
off /
i
button (13)�
The appliance rinses and switches off�
N.B.: If the appliance is being used for the
first time, a service program has been run,
or the appliance has not been operated
for a long period, the first beverage will
not have the full aroma and should not be
consumed�
When using the espresso machine for the
first time, you will achieve a suitably thick
and stable “crema” only after the first few
cups have been dispensed�
After extended use, water droplets may
form on the ventilation slots� This is normal�
Water filter
A water filter can prevent scale buildup.
Before a new water filter is used, it must be
rinsed. To do this, proceed as follows:
● Press the water filter firmly into the
water tank with the aid of the measuring
spoon (19)�
● Fill the water tank (17) with water up to
the
max
mark�
● Press and hold the
k
off /
i
button (13)
for at least three seconds� The menu
opens�
● Press the
k
off /
i
button (13) repeatedly
until the display shows
No / Old filter
�
● Select
Activate filter
with the upper
rotary knob (15)�
● Press the start button (10)�
● Place a receptacle with a capacity of
0�5 litres under the outlet (6a)�
● Press the start button (10)�
● Water will now flow through the filter to
rinse it�
● Empty the container�
The appliance is ready to use once more�
Note: Rinsing the filter simultaneously
activates the setting for the
Change filter!
display�