Siemens EH675MV17E, Инструкция по эксплуатации, Страница: 12 / 21

11
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The range must be turned off.
To activate: press and hold the
#
symbol for approx. 4
seconds. The @ symbol lights up for 10 seconds. The range
is locked.
To deactivate: press and hold the
#
symbol for approx. 4
seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
All of the relevant information on the automatic childproof lock
connection can be found in the Basic settings chapter.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level Š .
Restrictions when using
This function may be used for all hotplates, provided that the
other hotplate in the same group is not turned on. (See figure)
Otherwise, the › and Š symbols will flash on the display of the
selected hotplate; then the power level Š is automatically set
without the function being activated.
Note:
The Powerboost function can be activated in the flexible
zone when used as a single hotplate. In this case, place the
pan in the centre as shown in the Flexible zone section.
To activate
1.
Select the power level Š .
2.
Press the programming panel located above the
@ ›
symbol.
The function has been activated.
To turn off
Press the programming panel located above the
@ ›
symbol.
The Powerboost function has been deactivated.
Note:
In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
■
to automatically switch off a hotplate.
■
as a timer.
Turning off a hotplate automatically
The zone turns off automatically once the selected time has
elapsed.
Programming the cooking time.
The hob must be switched on:
1.
Select the hotplate and the desired power level.
2.
Press the
0
symbol. The
x
indicator on the hotplate lights
up.
‹‹
is displayed on the time program function display. To
select another hotplate, press the
0
symbol several times
until the
x
indicator for the desired hotplate lights up.
3.
Within the next 10 seconds, select the desired cooking time
in the programming zone. The possible default setting is,
from left to right: 1, 2, 3, etc., up to 10 minutes.
After a few seconds, the cooking time begins to elapse.
Note:
The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The
Basic settings chapter provides information on
automatically programming the cooking time.
*URXS
*URXS
*URXS
*URXS