Siemens ecofast 3RK1702-2GB18-0AA1, Руководство пользователя

Страница: 114 / 150

Commissioning and diagnostics
ECOFAST Motor Starters
4-2
GWA 4NEB 950 5221-12 DS 02
4.1 Process data and process images
Definition of process image
The process image is part of the system memory in the AS-i master. At the
start of the cyclical program, the signal states of the inputs are transferred
to the process image of the inputs. At the end of the cyclical program, the
process image of the outputs is transferred to the slave as a signal state
.
Table
The table below shows the process data and process images:
Table 4-1: Process data and process image, AS-Interface
Process data Process image:
4 outputs, DO 0.0 to DO 0.3
4 inputs, DI 0.0 to DI 0.3
4 parameters, PO 0.0 to PO 0.3
Signal:
[1]: HIGH
[0]: LOW
Outputs Control commands (PLC to motor starter)
DO - 0. 0 Motor CW
[1]: ON
[0]: OFF
1 Motor CCW
[1]: ON
[0]: OFF
2 Brake
[1]: ON
[0]: OFF
3 Trip Reset
[
0] –> [1]: ACTIVE
[0], [1]: NOT ACTIVE
Inputs Signals (motor starter to PLC)
DI- 0. 0 Ready (automatic) [1]: YES
[0]: NO
1 Motor on [1]: YES
[0]: NO
2 IN1 (input 1) [1]: 24 V present
[0]: OPEN
3 IN2 (input 2) [1]: 24 V present
[0]: OPEN
Parameters Technology (PLC to motor starter)
PO- 0. 0 Reserved
1 Temperature sensor [1]: Thermoclick
[0]: PTC type A
2 Behavior in the event of
overload - temperature sensor
[1]: Trip
[0]: Warn
3 Auto reset [1]: NO
[0]: YES
0
1