Siemens Ecofast 3RK1 323-2AS54-1AA0, Руководство пользователя

Страница: 37 / 76

Installation of Motor Starters
ECOFAST Motor Starters
GWA 4NEB 950 5221-12 DS 01
3-5
Deutsc
h
En
glish
3.3 Setup with motor nearby
3.3.1 Required components
The table below shows which components are required:
Table 3-5: Components required for setting up with the motor nearby
Item Order data Order number
1 Motor starter 3RK13..
depending on version
2 4 fixing screws, 5 mm diameter, if necessary nuts,
spring washers, plain washers
3 Motor connection cable for motor starter - motor
connection Han 10E
(prefabricated or prepared by customer) 3RK1911-0.. depending
on length, cross section,
Han 10E one end/
both ends
4 Power T clamping connector, optional
5 x 4 mm
2
5 x 6 mm
2
3RK1911-2BF01
3RK1911-2BF02
Power cable 3RK1911-0A.. depending
on the length and cross-
section
5 AS-i cable, trapezoidal-section yellow,
rubber 2 x 1.5 mm
2
for fieldbus
3RX901.-0AA00
depending on length
6 AS-i cable, trapezoidal-section black,
rubber 2 x 1.5 mm
2
for ext. 24 V auxiliary voltage
AUX PWR
3RX902.-0AA00
depending on length
7 Cable end covers for sealing open
cable ends (1 set = 10 covers)
3RK1901-1MN00