Siemens Desigo TRA QMX3.P36F, Руководство пользователя

Страница: 10 / 14

A list item provides status information:
•
Tick : Indicates the current selection from the room automation station. A change
from hourglass to tick indicates that the automation station has confirmed the
modifications the user just made.
•
Hourglass : Indicates the progress of the selected activity.
•
Lock : Indicates locked entries that cannot be selected / enabled.
•
Floppy disk : Is only used in scene saving, and will be displayed for 1 second,
then go back to "Tick".
Maintenance
The device can be cleaned with off-the shelf, solvent-free cleaning agents.
Do not use mechanical aids (rough sponge or similar materials) – only a soft, damp
cloth.
Dismounting: see page 5.
Technical data
Supply voltage Operating voltage range KNX PL-Link DC 21...30 V
The room operator unit receives its power from the connected room automation station
via the KNX PL-Link interface
Power consumption
(from room automation station) Max.10 mA at DC 24 V
Series A: Max.12.5 mA at DC 24 V
Operating data
Temperature sensor
Measuring element NTC resistance sensor
Measuring range 0...50 °C
Measuring accuracy (5 … 30 °C)
±
0.61 K
Measuring accuracy (25 °C)
±
0.35 K
Display Type Dot matrix LCD, resolution 96 x 128
Information displayed depends on the
application in the PXC3... room automation
station
−
Room temperature
−
Setpoint adjustment
−
Control mode
−
Manually selected fan speed
−
Control sequence
−
Scenes
−
etc.
Ports/interfaces Type of port between room automation station
and room operator unit KNX PL-Link
Baud rate 9.6 kbps
Standard KNX plug Wire diameter0.8 mm, max. 1.0 mm
(solid conductors only)
Cable type Solid conductors 2-core, twisted pair
Single cable length (from room automation
station to room operator unit) <1000 m
Cables must comply with KNX specifications, see TRA Installation manual, CM111043
Housing protection Protection standard as per EN 60529 IP 30
Protection class Insulation protection class III
Status information
STOP
Note!
10 / 14
Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04
Building Technologies 2016-03-24